Product Description
Product Description
The 90mm 4:1 low vibration planetary gear reducer for automation equipment RA series is a gripper design. Aluminum alloy material can improve the heat dissipation capacity, reduce the impact of temperature rise phenomenon. Diversified output shaft can be adapted to various occasions, customized entry end can be matched with all kinds of motors. Provide a variety of characteristics of the reducer, for users to choose according to demand. Special oil seal design, normal use without maintenance or replacement of lubricating oil, can extend the service life. Small size, save space, low noise, high output torque, easy installation, can be matched with a wide range of motor models.
The RAH is fitted with the DM, forming the gear set in 1 piece to effectively reduce noise. RAH with DH, the best cost-effective, can be widely used in a variety of occasions.
Product Parameters
| Size | RA065 | RA090 | RA110 | RA140 | RA170 | RA210 | |
| D1 | M4 | M6 | M8 | M10 | M12 | M16 | |
| D3 k6 | 13 | 18 | 22 | 32 | 40 | 50 | |
| D4 h7 | 63 | 88 | 108 | 135 | 165 | 205 | |
| D5 | 48 | 60 | 90 | 110 | 122 | 130 | |
| D6 | M4 | M5 | M8 | M12 | M16 | M16 | |
| D7 | 21 | 28 | 33 | 47 | 55 | 75 | |
| D12 | 62 | 86 | 106 | 104 | 128 | 160 | |
| D14 h7 | 63 | 88 | 108 | 135 | 165 | 205 | |
| D15 | 62.9 | 87 | 107 | 103 | 127 | 158 | |
| L1 | 65 | 90 | 110 | 140 | 170 | 210 | |
| L2 | 19.5 | 35 | 40 | 50 | 60 | 75 | |
| L3 | 13 | 15 | 15 | 15 | 15 | 20 | |
| L4 | 2 | 2 | 2 | 2 | 2 | 2 | |
| L5 | 16 | 28 | 32 | 45 | 50 | 70 | |
| L6 | 2 | 3.5 | 4 | 2.5 | 5 | 2.5 | |
| L7 | 47.5 | 62 | 72 | 87 | 102 | 127 | |
| L8 | 67 | 97 | 112 | 137 | 162 | 202 | |
| L9 | 4.5 | 4.8 | 7.2 | 10 | 12 | 12 | |
| L10 | 10 | 12.5 | 20 | 30 | 40 | 40 | |
| L11 | 27 | 36 | 44 | 55 | 67 | 85 | |
| L13 | 13 | 15 | 15 | 15 | 15 | 20 | |
| L21 | 38 | 49 | 54 | 55 | 63 | 83 | |
| L22 | 70.5 | 94 | 109 | 125 | 148 | 188 | |
| C1¹ | 70 | 100 | 130 | 130 | 165 | 215 | |
| C2¹ | M5 | M6 | M8 | M8 | M10 | M12 | |
| C3¹ | ≤14 | ≤24 | ≤24 | ≤32 | ≤38 | ≤55 | |
| C4¹ | ≤34 | ≤40 | ≤46 | ≤53 | ≤66 | ≤82.5 | |
| C5¹ | 50 | 80 | 80 | 110 | 130 | 180 | |
| C6¹ | 8 | 6 | 10 | 10 | 10 | 11 | |
| C7¹ | 65 | 90 | 110 | 115 | 142 | 190 | |
| C8¹ | 30.5 | 31 | 32.5 | 50 | 54.5 | 76 | |
| C9¹ | 133.5 | 170 | 196.5 | 245 | 287.5 | 369 | |
| C10¹ | 14.5 | 17 | 19 | 19 | 23 | 24 | |
| B1 h9 | 5 | 6 | 6 | 10 | 12 | 14 | |
| H1 | 15 | 20.5 | 24.5 | 35 | 43 | 53.5 | |
Product Details
Other Products
Product Advantage
Product features:
1. aluminum alloy material can improve the heat dissipation capacity, slow down the temperature rise phenomenon.
2. reciprocating positioning accuracy is good.
3. customized into the force end, can be matched with all kinds of motors.
4. oil seal with special design, normal use without maintenance or replacement of lubricating oil.
5. Diversified output shaft can be adapted to various occasions.
6. to provide a single segment of 1-5 ratio design to make the product ratio more diversified.
7. provide ball and tapered roller bearings for customers to choose.
8. provide in a precision level for customers to choose.
Company Profile
FAQ
Q:Key points of selection of planetary reducer
A:1. Frame number determined by torque: the power source will have the effect of torque amplification after deceleration ratio. The output torque value of the reducer is proportional to the deceleration ratio, and the larger the ratio, the higher the torque value will be; But the gear group of the reducer has the limit, so the rated output torque of the planetary reducer is to say that the product can work stably under the data operation, so the box number must be selected according to the demand torque.
2. According to the accuracy to determine the model: in the process of automation will need positioning, when the positioning accuracy requirements are higher, you need to choose a higher level of products, and vice versa. The precision of the planetary reducer is called the “backgap”, which refers to the gap of the gear group. The definition is the Angle value that the output shaft of the planetary reducer can rotate when the input end is fixed. The smaller the return clearance is, the higher the accuracy is and the higher the cost is. The user can choose the right accuracy according to their actual situation.
3. According to the installation size selection: that is, the size of the front end of the servo motor. The input end of the planetary reducer must match the output end of the servo motor.
4. According to the appearance selection: according to customer demand output shaft and connecting surface has a standard series for users to choose, can also be customized according to user special needs.
5. According to the axial and radial force selection: the life of the planetary reducer is affected by the internal bearing, bearing life can be calculated through the load and speed, when the axial and radial force load of the reducer is higher, the bearing life will be shortened, at this time it is recommended to choose a large product.
| Application: | Motor, Machinery, Agricultural Machinery, Automatic Equipment |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Dynamic Modeling of a Planetary Motor
A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.
planetary gear system
A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
planetary gear train
To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?
planetary gear train with fixed carrier train ratio
The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
planetary gear train with zero helix angle
The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!
planetary gear train with spur gears
A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
planetary gear train with helical gears
A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.
editor by CX 2023-11-15
China OEM 0.55kw Bwed Xwed Bled Xled Double Stage Cycloidal Speed Reducer Gearbox Gear Motor supplier
Product Description
If you need to customize non-standard gearbox,
we can customized based on drawings or samples!
Product Description
| Model Number | Soft Surface Tooth Reducer | Price | Negotiable |
| Assembly Method | 1-9 | Input Speed | 600-1500r/min |
| Enamelled Wire | 100% Copper Wire | Reducer body | Steel |
| Ratio | 8.23 10.35 12.64 15.75 20.49 23.34 31.5 40.17 48.5 | Brand | TXL REDUCER |
Produce Details
About Us
Xihu (West Lake) Dis. HangZhou Reducer Co., Ltd. is a national large-scale enterprise, a national second-level enterprise, a national advanced enterprise in field management, and 1 of the 500 largest machinery industry enterprises in China. Our company has more than 100 sets of production equipment for various types of reducers, and the products are divided into more than a dozen categories and hundreds of models.
Mainly including WH series arc cylindrical worm reducer, CW series arc cylindrical worm reducer, SCW shaft-mounted arc tooth worm gear reducer, WD WS series cylindrical worm reducer, SWL series JWM series worm gear lift, plane secondary envelope toroidal worm reducer, TP series envelope worm reducer, PW series envelope reducer, CW series modular reducer, ZQQH ZQSH ZD ZL ZS Z Cylindrical gear reducer, ZDY ZLY Design and development of ZSY hard tooth surface gear reducer, X/B series planetary cycloidal needle wheel reducer, 8000 series planetary cycloidal reducer and other non-standard products.
Our factory has a complete quality, environment, occupational CZPT and safety 3 major management system collection certification, and has a large number of advanced equipment and testing instruments at home and abroad such as Niles forming and grinding machine imported from Germany, OKUMA horizontal machining center, gear testing center and coordinate measuring instrument imported from Japan.
RFQ
Q:What information should I tell you to confirm speed reducer?
A: Model/Size, Transmission Ratio, Shaft directions & Order quantity.
Q:What if I don’t know which gear reducer I need?
A:Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q:What should I provide if I want to order NON-STANDERD speed reducers?
A: Drafts, Dimensions, Pictures and samples if possible.
Q:What is the MOQ?
A: It is OK for 1 or small pieces trial order for quality testing.
Q:Who I should contact?
A:Please contact Eason Li if you need more help.
Q:How long should I wait for the feedback after I send the inquiry?
A: Within 12 hours
Q:What is the payment term?
A:You can pay via T/T(30% in advance+70% before delivery), L/C ,West Union etc
Q:What is the delivery time?
A:Normally is 20-30days after order, for special model or big quantity please email to us for checking.
Q:What is the guarantee time?
A:12months
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Soft Tooth Surface |
| Installation: | 90 Degree |
| Layout: | Coaxial |
| Gear Shape: | Conical – Cylindrical Gear |
| Step: | Stepless |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Dynamic Modeling of a Planetary Motor
A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.
planetary gear system
A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
planetary gear train
To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?
planetary gear train with fixed carrier train ratio
The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
planetary gear train with zero helix angle
The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!
planetary gear train with spur gears
A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
planetary gear train with helical gears
A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.
editor by CX 2023-05-25
China Best Quality K Series Helical-Bevel Gearbox Motors supplier
Item Description
Ideal High quality K Sequence Helical-Bevel Gearbox Motors
Solution Description
Description: K Sequence Helical Bevel Gearbox
Overview
(1) Enter manner: coupled motor, belted motor, input shaft or connection flange.
(2) Right angle output.
(3) Compact composition.
(4) Rigid tooth face.
(5) Carrying better torque, large loading potential.
(6) Large precision gear, guaranteeing the unit to operate stably, easy transmission.
(7) Lower noise, lengthy lifespan.
(8) Big overlap coefficient, abrasion resistant.
Thorough Pictures
K collection equipment units are obtainable in the adhering to designs:
KAZ..Y..Quick-flange-mounted helical-bevel gear units with hollow shaft
K…Y…Foot-mounted helical-bevel equipment models with strong shaft
KAT…Y…Torque-arm-mounted helical-bevel gear models with hollow shaft
KAB…Y…Foot-mounted helical-bevel equipment units with hollow shaft
K(KF,KA,KAF,KAB,KAZ)S…Shaft input helical-bevel gear units
KA…Y…Helical-bevel equipment models with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)R..Y..Combinatorial helical-bevel equipment units
KF…Y…Flange-mounted helical-bevel gear models with strong shaft
KA(K, KF ,KAF ,KAZ)S…R…Shaft enter combinatorial helical-bevel gear models
KAF…Y…Flange-mounted helical-bevel equipment models with hollow shaft
KA(K, KF ,KAF, KAB ,KAZ)…Y…When equipping the user’s motor or the particular 1 ,the flange is necessary to be related
Composition:
| K(-) |
K(A) | K(F) | Input power range | Output speed | Output torque |
| Foot-mounted | Hollow shaft output |
Flange-mounted | .eighteen-200kw | .1-270r/min | Up to 50000Nm |
Merchandise Parameters
Enter electrical power score and greatest torque:
| Size |
38 | 48 | fifty eight | 68 | 78 | 88 | 98 | 108 | 128 | 158 | 168 | 188 |
| Composition |
K KA KF KAF KAZ KAT KAB | |||||||||||
| Enter energy rating(kw) |
.18~ three. |
.eighteen~ three. |
.eighteen~ five.5 |
.eighteen~ five.five |
.37~ 11 |
.seventy five~ 22 |
1.3~ 30 |
three~ forty five |
7.5~ 90 |
11~ one hundred sixty |
11~ two hundred |
eighteen.5~ 200 |
| Ratio | 5.36~ 106.38 |
five.eighty one~ 131.87 |
six.fifty seven~ 145.15 |
seven.14~ 44.seventy nine |
7.22~ 192.18 |
7.19~ 197.27 |
8.ninety five~ 175.forty seven |
8.74~ 141.93 |
eight.68~ 146.07 |
12.sixty six~ a hundred and fifty.03 |
17.35~1 sixty four.forty four |
17.ninety seven~ 178.37 |
| Optimum Torque(N.m) |
two hundred | four hundred | 600 | 820 | 1550 | 2770 | 4300 | 8000 | 13000 | 18000 | 32000 | 50000 |
Gear device weight:
| Size |
38 | forty eight | fifty eight | sixty eight | seventy eight | 88 | 98 | 108 | 128 | 158 | 168 | 188 |
| Weight |
11 | 20 | 27 | 33 | fifty seven | 85 | 130 | 250 | 380 | 610 | 1015 | 1700 |
The weights are suggest values, only for reference.
Maximum torque signifies the greatest 1 of the greatest torque relevant to the diverse ratio for the specified measurement.
Rated Electrical power:.18KW~200KW
Rated Torque:Up to 50000N.m
Equipment Arrangement:Bevel Helical Hardened Gearbox
Enter Pace:50HZ or 60HZ of 4Pole,6Pole and 8pole motor
Ratio:5.36~192.eighteen
Packaging & Transport
Company Profile
Our Benefits
After Sales Service
| Pre-sale companies | 1. Pick tools model. |
| two.Style and manufacture items according to clients’ particular need. | |
| three.Teach complex private for consumers | |
| Services during offering | 1.Pre-verify and take items ahead of shipping and delivery. |
| two. Assist clients to draft fixing ideas. | |
| After-sale solutions | 1.Assist consumers to get ready for the first building scheme. |
| two. Prepare the very first-line operators. | |
| three.Just take initiative to remove the difficulty rapidly. | |
| four. Give specialized exchanging. |
FAQ
one.Q:What types of gearbox can you generate for us?
A:Principal items of our firm: UDL collection velocity variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B collection gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, much more
than 1 hundred models and countless numbers of specifications
2.Q:Can you make as for each custom drawing?
A: Of course, we offer you tailored provider for buyers.
three.Q:What is your conditions of payment ?
A: 30% Progress payment by T/T after signing the agreement.70% ahead of supply
4.Q:What is your MOQ?
A: 1 Set
Make contact with:
If you are fascinated in our solution, welcome you make contact with me.
Our team will help any want you may have.
|
/ Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Bevel Gear |
| Step: | Double-Step |
###
| Samples: |
US$ 15/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| K(-) |
K(A) | K(F) | Input power range | Output speed | Output torque |
| Foot-mounted | Hollow shaft output |
Flange-mounted | 0.18-200kw | 0.1-270r/min | Up to 50000Nm |
###
| Size |
38 | 48 | 58 | 68 | 78 | 88 | 98 | 108 | 128 | 158 | 168 | 188 |
| Structure |
K KA KF KAF KAZ KAT KAB | |||||||||||
| Input power rating(kw) |
0.18~ 3.0 |
0.18~ 3.0 |
0.18~ 5.5 |
0.18~ 5.5 |
0.37~ 11 |
0.75~ 22 |
1.3~ 30 |
3~ 45 |
7.5~ 90 |
11~ 160 |
11~ 200 |
18.5~ 200 |
| Ratio | 5.36~ 106.38 |
5.81~ 131.87 |
6.57~ 145.15 |
7.14~ 44.79 |
7.22~ 192.18 |
7.19~ 197.27 |
8.95~ 175.47 |
8.74~ 141.93 |
8.68~ 146.07 |
12.66~ 150.03 |
17.35~1 64.44 |
17.97~ 178.37 |
| Maximum Torque(N.m) |
200 | 400 | 600 | 820 | 1550 | 2770 | 4300 | 8000 | 13000 | 18000 | 32000 | 50000 |
###
| Size |
38 | 48 | 58 | 68 | 78 | 88 | 98 | 108 | 128 | 158 | 168 | 188 |
| Weight |
11 | 20 | 27 | 33 | 57 | 85 | 130 | 250 | 380 | 610 | 1015 | 1700 |
###
| Pre-sale services | 1. Select equipment model. |
| 2.Design and manufacture products according to clients’ special requirement. | |
| 3.Train technical personal for clients | |
| Services during selling | 1.Pre-check and accept products ahead of delivery. |
| 2. Help clients to draft solving plans. | |
| After-sale services | 1.Assist clients to prepare for the first construction scheme. |
| 2. Train the first-line operators. | |
| 3.Take initiative to eliminate the trouble rapidly. | |
| 4. Provide technical exchanging. |
|
/ Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Bevel Gear |
| Step: | Double-Step |
###
| Samples: |
US$ 15/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| K(-) |
K(A) | K(F) | Input power range | Output speed | Output torque |
| Foot-mounted | Hollow shaft output |
Flange-mounted | 0.18-200kw | 0.1-270r/min | Up to 50000Nm |
###
| Size |
38 | 48 | 58 | 68 | 78 | 88 | 98 | 108 | 128 | 158 | 168 | 188 |
| Structure |
K KA KF KAF KAZ KAT KAB | |||||||||||
| Input power rating(kw) |
0.18~ 3.0 |
0.18~ 3.0 |
0.18~ 5.5 |
0.18~ 5.5 |
0.37~ 11 |
0.75~ 22 |
1.3~ 30 |
3~ 45 |
7.5~ 90 |
11~ 160 |
11~ 200 |
18.5~ 200 |
| Ratio | 5.36~ 106.38 |
5.81~ 131.87 |
6.57~ 145.15 |
7.14~ 44.79 |
7.22~ 192.18 |
7.19~ 197.27 |
8.95~ 175.47 |
8.74~ 141.93 |
8.68~ 146.07 |
12.66~ 150.03 |
17.35~1 64.44 |
17.97~ 178.37 |
| Maximum Torque(N.m) |
200 | 400 | 600 | 820 | 1550 | 2770 | 4300 | 8000 | 13000 | 18000 | 32000 | 50000 |
###
| Size |
38 | 48 | 58 | 68 | 78 | 88 | 98 | 108 | 128 | 158 | 168 | 188 |
| Weight |
11 | 20 | 27 | 33 | 57 | 85 | 130 | 250 | 380 | 610 | 1015 | 1700 |
###
| Pre-sale services | 1. Select equipment model. |
| 2.Design and manufacture products according to clients’ special requirement. | |
| 3.Train technical personal for clients | |
| Services during selling | 1.Pre-check and accept products ahead of delivery. |
| 2. Help clients to draft solving plans. | |
| After-sale services | 1.Assist clients to prepare for the first construction scheme. |
| 2. Train the first-line operators. | |
| 3.Take initiative to eliminate the trouble rapidly. | |
| 4. Provide technical exchanging. |
The Basics of a Planetary Motor
A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.
Self-centering planetary gears
This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
High torque
Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
High efficiency
A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
High cost
In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.
editor by CX 2023-03-29
China 16mm Planetary Reduction Gearbox Low Rpm DC Motor supplier
Solution Description
Merchandise Description
16mm Planetary Reduction Gearbox Lower RPM dc Motor Specifications:
Observe : It’s just the normal technical information for you reference, The specification this sort of as voltage, pace, torque, shaft can custom-made.
Much more Details:
Rated Voltage: 3V/6V/12V/24V
No Load Pace: 4-3500RPM
Load Torque: 1-4kgf.cm
Reduction Ratio: 1:4-1:2418
Output Power: 0.5-10W
Motor Diameter: 15.4mm
Gearbox Diameter: 16mm
Motor Duration: 26.9mm
Gearbox Duration: 13-29mm
Shaft Sort: D-minimize, spherical or keyway
Associated Merchandise
Business Profile
HangZhou CZPT Co. Ltd is a manufacturer and exporter of various of motors with more than 10 a long time experience.
Our product ranges consist of:
1) DC Brush motor: 6-130mm diameter, .01-1000W output electricity
two) DC Spur Gear Motor: twelve-110mm diameter, .1-300W output electricity
3) DC Planeary Gear Motor: ten-82mm diameter, .1-100W output power
4) Brushless DC Motor: 28-110mm, 5-1500W output power
five) Stepper Motor: NEMA 08 to NEMA forty three, Can with gearbox and lead screw
6) Servo Motor: 42mm to 130mm diameter, 50-4000w
seven) AC Equipment Motor: forty nine to 100mm diameter, 6-a hundred and forty output power
Production Products
Certifications
Consumer Pay a visit to and Fair
FAQ
Q: What is your main goods?
A:We at present make Brushed Dc Motors, Brushed Dc gear Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors etc. You can check out the specifications for over motors on our internet site and you can email us to advise essential motors for each your specification too.
Q:How to pick a suitable motor?
A:If you have motor photos or drawings to demonstrate us, or you have in depth specs like voltage, speed, torque, motor dimensions, doing work mode of the motor, required daily life time and sound degree and so on, make sure you do not wait to let us know, then we can recommend suitable motor per your ask for appropriately.
Q: Do you have custom-made provider for your common motors?
A:Yes, we can customise for every your ask for for the voltage, pace, torque and shaft dimensions/shape. If you need additional wires/cables soldered on the terminal or need to have to include connectors, or capacitors or EMC we can make it way too.
Q:Do you have person design support for motors?
A:Sure, we would like to style motors separately for our consumers, but it might need some CZPT charge and design demand.
Q:Can I have samples for testing 1st?
A:Indeed, definitely you can. Soon after verified the necessary motor specs, we will estimate and give a proforma bill for samples, when we get the payment, we will get a PASS from our account department to commence samples accordingly.
Q:How do you make confident motor top quality?
A:We have our very own inspection techniques: for incoming supplies, we have signed sample and drawing to make sure experienced incoming materials for production procedure, we have tour inspection in the process and final inspection to make certain experienced items ahead of shipping and delivery.
Q:What’s your guide time?
A:Normally speaking, our normal regular solution will need 25-30days, a bit longer for tailored products. But we are quite flexible on the guide time, it will relies upon on the particular orders
Q:What is your payment expression?
A:For all our new clients, we will need forty% deposite, 60% compensated just before shipment.
Q:When will you reply right after acquired my inquiries?
A:We will reaction in 24 several hours when get your inquires.
Q:How can I trust you to make certain my money is secure?
A:We are licensed by the 3rd party SGS and we have exported to more than eighty five countries up to June.2017. You can examine our track record with our recent customers in your country (if our consumers do not thoughts), or you can buy via alibaba to get trade assurance from alibaba to make positive your income is safe.
Q:What is the bare minimum get amount?
A:Our least buy amount is dependent on various motor types, remember to e mail us to verify. Also, we generally do not settle for individual use motor orders.
Q:What’s your transport technique for motors?
A:For samples and offers significantly less than 100kg, we usually advise specific shipping and delivery For hefty deals, we typically recommend air shipping or sea shipping. But it all is dependent on our customers’ wants.
Q:What certifications do you have?
A:We at present have CE and ROSH certifications.
Q:Can you send out me your value listing?
A:Because we have hundreds of distinct goods, and value varies for each distinct technical specs, we are not CZPT to provide a price checklist. But we can quote inside 24 hrs after acquired your inquirues to make certain you can get the cost in time.
Q:Can I visit your business?
A:Yes, welcome to go to our firm, but remember to permit us know at least 2 weeks in progress to help us make positive no other conferences in the course of the working day you go to us.
Many thanks!
Get in touch with Us
HangZhou CZPT Co.,Ltd
Get in touch with Person: Celia Chen
Any e-mail or trademanager inquires will be replied inside of 24 several hours.
Typical samples can be offer extremely rapidly(inside 10 days)
Custom-made support for type of motor accoring to your prerequisite
Expert Tchnical assist and After-sale provider
Sourcing motor parts like gears, encoders, cables, connectors and so on
| Application: | Universal, Industrial, Household Appliances, Power Tools, Robot, Toys, Door Lock, Monitor |
|---|---|
| Operating Speed: | Low Speed |
| Function: | Driving |
| Casing Protection: | Closed Type |
| Structure and Working Principle: | Brush |
| Certification: | ISO9001, CCC, Ce, RoHS |
###
| Samples: |
US$ 15/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
| Application: | Universal, Industrial, Household Appliances, Power Tools, Robot, Toys, Door Lock, Monitor |
|---|---|
| Operating Speed: | Low Speed |
| Function: | Driving |
| Casing Protection: | Closed Type |
| Structure and Working Principle: | Brush |
| Certification: | ISO9001, CCC, Ce, RoHS |
###
| Samples: |
US$ 15/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
What Is a Gear Motor?
A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.
Inertial load
Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Applications
There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.
Size
The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Cost
A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Maintenance
Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.
editor by czh 2023-01-24
in Moscow Russian Federation sales price shop near me near me shop factory supplier Marine Parts Gearbox Transmission Kapal Laut Kecil Used Motor Planetary Toyota Bonfiglioli Tiller Worm Washing Machine Gear Box Speed Reducer Stainless Steel manufacturer best Cost Custom Cheap wholesaler
Our products are used in several fields. Our experts and engineers have 23 a long time of Experience in the Bearing Business. focus in electricity transmission items, CATV items, mechanical seal, hydraulic and Pheumatic, and marketing goods.
Marine areas EPT EPT kapal laut kecil used motor planetary toyota bonfiglioli tiller worm washing EPT EPT box speed EPT stainless metal
in Mazar-e Sharif Afghanistan sales price shop near me near me shop factory supplier Quality Branded Devo Gearbox Cycloidal Pin Gear Speed Reducer manufacturer best Cost Custom Cheap wholesaler
The high precise CNC tools, this sort of as Gradual-feeding wire-lower machine, jig grinding device and electrical discharge equipment, assures the prime quality precision of mould processing, with the higher successful and environmental defense acid rolling line becoming the premier raw material changing equipment in the area in china The wildly use of computerized milling equipment, high-velocity automated feeding punch, high speed automated rolling and assembling machine assures the high top quality and effectiveness of components and chain producing. We have exported our merchandise to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the Usa, Canada, and so on. The item effectively displays environmental security and energy saving.
Rated Input EPT of Cycloidal EPT for One-stage EPT
| Stand no. | EPT Ratio | ||||||||
| eleven | 17 | 23 | 29 | 35 | 43 | 59 | 71 | 87 | |
| X2 B0 |
.seventy five .fifty five |
.55 | .37 .25 |
||||||
| X3 B1 |
two.2 1.5 |
1.five one.1 |
1.1 .75 |
.55 | |||||
| X4 B2 |
4 3 |
two.two one.5 |
one.5 1.1 |
1.one .75 |
.75 | ||||
| X5 B3 |
7.five 5.5 |
five.5 4 |
four three |
three two.two |
2.2 one.five |
one.5 | |||
| X6 B4 |
11 seven.five |
seven.five 5.five |
5.five four |
4 three |
three two.two |
two.2 | |||
| X7 | 15 11 |
11 7.5 |
seven.5 5.five |
five.five 4 |
four | ||||
| X8 B5 |
eighteen.5 15 |
fifteen 11 |
eleven seven.5 |
7.5 5.five |
5.five | ||||
| X9 B6 |
22 eighteen.5 |
eighteen.5 fifteen |
15 11 |
11 | |||||
Function:
Large speed ratio and high efficiency of solitary phase EPT, can obtain one:87 reduction ratio, the effectiveness of a lot more than ninety%, if the use of multi-stage EPT, reduction ratio is bigger.
Compact structure and small volume due to the adoption of planetary EPT principle, the enter shaft output shaft in the identical aXiHu (West Lake) Dis.s line, so that its product to obtain the smallest possible dimension.
Smooth managing sounds low cycloidal needle teeth meshing teeth variety, overlap coefficient is massive and has the system of elements balance, vibration and sound restrict in the minimum diploma.
The use of trustworthy, EPT lifestyle since the major elements of the high carbon chromium metal material, right after quenching treatment (HRC58 ~ 62) to acquire higher power, and, part of the EPT get in touch with employing rolling friction, so EPT daily life.
Software location
Cycloid EPT EPT makes use of cycloid tooth meshing, planetary EPT theory, so it is normally named planetary cycloid EPT.
Planetary cycloid pin-wheel EPT can be extensively utilised in petroleum, environmental protection, chemical market, cement, transportation, textile, pharmaceutical, meals, printing, lifting, mining, metallurgy, construction, EPT generation and other EPT, as a driving or decelerating device, the EPT is divided into horizontal, vertical, biaXiHu (West Lake) Dis.al and direct assembly mode.
Its EPT smooth framework in several circumstances can change the ordinary cylindrical EPT EPT and worm EPT EPT, therefore, planetary cycloid EPT EPT is broadly utilized in numerous EPT and fields, by the greater part of customers are EPTly welcomed.
Qualities of transportation and EPT
Limited shipping time period,to guarantee timely shipping.
TigEPT EPT,to ensure the merchandise are not damaged during transportation.
Various modes of transportation,to ensure secure and well timed transportation
Adhere to up the EPT process of purchase,to guarantee item shipping and delivery to customers.
EPT shelf existence, to guarantee buyer knowledge.
FAQ
Q1: Are you a buying and selling firm or a producer ?
A: We are a manufacturer in EPTngsu Province, EPT. Our firm owns the ability of production, processing, creating and R ampD. We welcome your check out.
Q2: How we decide on models and requirements?
A: In accordance to the certain particulars of the requires from the element of enquiry, we will advise the products’ models on synthesizing the variables of subject of products usage, EPT, torque arm and ratio…
Q3: How is your price tag? Can you supply any price cut?
A: Our prices are alwaEPTcompetitive. If the client can place a massive order, we certainly will allow price reduction.
This autumn: How EPT should I wait for the comments soon after I ship the enquiry?
A: We will reply the enquiries without any hold off, twelve hours at most.
Q5: What is your item warranty period of time?
A: We have the certifications of ISO99001,CE,
Q6: What EPT are your EPTes currently being utilized?
A: Our EPTes are widely used to metallurgical equipment, mining gear, EPT equipment, foods EPTry, EPT products, tobacco gear and so on.
in Los Angeles United States sales price shop near me near me shop factory supplier Good Quality Manufacturer Factory RV Schneckengetriebemotoren Worm Gearbox 025-150 manufacturer best Cost Custom Cheap wholesaler
Much more importantly, we make specific components according to provided drawings/samples and warmly welcome OEM inquiries. In this way, our products have ongoing to achieve marketplace acceptance and customers fulfillment in excess of the earlier couple of a long time. We also can design and make non-regular goods to meet up with customers’ particular specifications. Item INTRODUCTION colon
Primary Functions colon
one rpar Created of substantial high quality EPT alloy comma ligEPT weigEPT and non-rusting
two rpar Large output torque and higher radiating effectiveness 3 rpar Smooth managing and lower sounds comma can function EPT time in dreadful problem
four rpar Great-seeking physical appearance comma durable service lifestyle and tiny volume
5 rpar Ideal for omnibearing installation
Major Components colon
1 rparhousing colon aluminium alloy ADC12 lparsize 571-090 rpar semi die solid iron EPT200 lparsize a hundred and ten-one hundred fifty rpar semi
two rparWorm colon20Cr comma ZI Involute profile semi carbonize ampquencher warmth remedy make EPT surface area hardness up to fifty six-sixty two HRC semi After precision grinding comma carburization layer aposs thickness amongst period3- period5mm period of time
three rparWorm Wheel colonwearable stannum alloy CuSn10-one
Item PARAMETERS colon
| Size | Specification | EPT ratio | |||||||||||||
| IEC | N | M | P | 7 period5 | 10 | fifteen | 20 | 25 | 30 | forty | 50 | sixty | 80 | one hundred | |
| D | |||||||||||||||
| twenty five | 56B14 | fifty | sixty five | eighty | 9 | nine | nine | nine | nine | nine | 9 | nine | nine | ||
| 30 | 63B5 | ninety five | one hundred fifteen | one hundred forty | eleven | eleven | 11 | eleven | eleven | eleven | eleven | 11 | |||
| 63B14 | sixty | 75 | ninety | ||||||||||||
| 56B5 | 80 | one hundred | a hundred and twenty | nine | nine | nine | 9 | nine | 9 | 9 | nine | nine | 9 | ||
| 56B14 | 50 | sixty five | 80 | 9 | 9 | nine | 9 | 9 | 9 | nine | nine | nine | nine | ||
| 40 | 71B5 | one hundred ten | one hundred thirty | one hundred sixty | fourteen | fourteen | fourteen | fourteen | fourteen | 14 | 14 | fourteen | |||
| 71B14 | 70 | 85 | one zero five | ||||||||||||
| 63B5 | 95 | 115 | 140 | 11 | eleven | 11 | 11 | eleven | 11 | 11 | 11 | 11 | eleven | eleven | |
| 63B14 | 60 | 75 | 90 | ||||||||||||
| 56B5 | 80 | a hundred | a hundred and twenty | nine | nine | 9 | 9 | ||||||||
| 50 | 80B5 | one hundred thirty | a hundred sixty five | two hundred | 19 | 19 | 19 | 19 | 19 | 19 | 19 | – | – | – | – |
| 80B14 | eighty | 100 | 120 | ||||||||||||
| 71B5 | a hundred and ten | a hundred thirty | a hundred and sixty | 14 | 14 | 14 | fourteen | 14 | 14 | 14 | fourteen | fourteen | 14 | – | |
| 71B14 | 70 | eighty five | one zero five | ||||||||||||
| 63B5 | ninety five | a hundred and fifteen | one hundred forty | – | – | – | – | – | – | – | eleven | eleven | eleven | eleven | |
| 63 | 90B5 | a hundred thirty | 165 | two hundred | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | – | – | – |
| 90B14 | 95 | one hundred fifteen | one hundred forty | ||||||||||||
| 80B5 | a hundred thirty | a hundred sixty five | two hundred | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | – | |
| 80B14 | eighty | a hundred | one hundred twenty | ||||||||||||
| 71B5 | one hundred ten | one hundred thirty | one hundred sixty | – | – | – | – | – | – | fourteen | 14 | fourteen | 14 | 14 | |
| 71B14 | 70 | eighty five | 105 | ||||||||||||
| seventy five | a hundred sol112B5 | one hundred eighty | 215 | 250 | 28 | 28 | 28 | – | – | – | – | – | – | – | – |
| a hundred sol112B14 | one hundred ten | one hundred thirty | one hundred sixty | ||||||||||||
| 90B5 | a hundred thirty | one hundred sixty five | 200 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | ||||
| 90B14 | ninety five | one hundred fifteen | a hundred and forty | ||||||||||||
| 80B5 | one hundred thirty | one hundred sixty five | 200 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | ||||
| 80B14 | eighty | 100 | a hundred and twenty | ||||||||||||
| 71B5 | 110 | one hundred thirty | one hundred sixty | 14 | 14 | fourteen | 14 | ||||||||
| ninety | 100 sol112B5 | a hundred and eighty | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | – | – | – | – | – |
| a hundred sol112B14 | a hundred and ten | a hundred thirty | 160 | ||||||||||||
| 90B5 | 130 | 165 | two hundred | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | ||
| 90B14 | ninety five | a hundred and fifteen | one hundred forty | ||||||||||||
| 80B5 | 130 | a hundred sixty five | two hundred | 19 | 19 | 19 | 19 | 19 | |||||||
| 80B14 | eighty | a hundred | one hundred twenty | ||||||||||||
| a hundred and ten | 132B5 | 230 | 265 | 300 | 38 | 38 | 38 | 38 | – | – | – | ||||
| one hundred sol112B5 | one hundred eighty | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | |||
| one hundred sol112B14 | one hundred ten | a hundred thirty | 160 | ||||||||||||
| 90B5 | a hundred thirty | one hundred sixty five | 200 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | |||||
| 80B5 | a hundred thirty | one hundred sixty five | two hundred | 19 | 19 | ||||||||||
| one hundred thirty | 132B5 | 230 | 265 | three hundred | 38 | 38 | 38 | 38 | 38 | 38 | 38 | – | – | – | |
| 100 sol112B5 | 180 | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | 28 | |||||
| 100 sol112B14 | a hundred and ten | one hundred thirty | 160 | ||||||||||||
| 90B5 | a hundred thirty | 165 | two hundred | 24 | 24 | ||||||||||
| a hundred and fifty | 160B5 | 250 | 300 | 350 | forty two | 42 | 42 | forty two | 42 | – | – | – | – | – | – |
| 132B5 | 230 | 265 | three hundred | 38 | 38 | 38 | 38 | 38 | 38 | ||||||
| one hundred sol112B5 | a hundred and eighty | 215 | 250 | 28 | 28 | 28 | 28 | ||||||||
Item Define Dimensions colon
Firm Transient INTRODUCTION colon
We are a expert EPT manufacturer found in EPTizhou comma EPT province period
Our major products is full variety of RV571-150 worm EPTs comma also equipped hypoid helical EPT comma Laptop models comma UDL Variators and AC EPTs time period
EPT are commonly utilized for apps these kinds of as colon foodstuffs comma EPT comma EPT comma substances comma pharmacy comma plastics comma paper-producing comma building EPTry comma metallurgic EPT comma environmental defense engineering comma and all sorts of automatic lines comma and assembly traces period
With fast shipping comma superior soon after-product sales support comma EPT making faXiHu (West Lake) Dis.Hu (West Lake) Dis.ty comma our items offer well the two at residence and overseas interval We have exported our EPTs to SouthEPT Asia comma EPTern Europe and the Middle EPT and so on periodOur goal is to deveXiHu (West Lake) Dis.Hu (West Lake) Dis. and innovate on the foundation of higher quality comma and EPT a good reputation for EPTs interval
WORKSHOP colon
EXHIBITIONS colon
FAQ colon
1 periodQ colonCan you make as for each customer drawing quest
A colon Yes comma we offer you tailored support for customers appropriately period We can use buyer aposs nameplate for EPTes period
two periodQ colonWhat is your terms of payment quest
A colon 30 percnt deposit just before creation commabalance T solT ahead of shipping and delivery time period
three periodQ colonAre you a investing company or producer quest
A colonWe are a manufacurer with EPT gear and knowledgeable employees interval
four periodQ colonWhat aposs your production capability quest
A colon8000-9000 PCS solMONTH
four periodQ colonWhat is your MOQ quest
A colon 1 pcs
five periodQ colonFree sample is obtainable or not quest
A colonYes comma we can source cost-free sample if customer concur to pay out for the courier EPT
six periodQ colonDo you have any certificate quest
A colonYes comma we have CE certificate and SGS certificate report period
Speak to info colon
Ms Lingel Pan
For any concerns just feel free of charge ton make contact with me period of time Many many thanks for your variety focus to our firm excl
in Izhevsk Russian Federation sales price shop near me near me shop factory supplier Atg China Manufacturer Plate Type Planetary Gearbox manufacturer best Cost Custom Cheap wholesaler
With EPG model registered in much more than 70 international locations like The us , Europe , Japan and so on, it has companions among globe best enterprises, this sort of as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and many others. With several years’ expertise in these traces, we have been distinguished from other suppliers in China by our advantages in competitive pricing, on-time delivery, prompt responses, on-hand engineering support and good right after-product sales providers. Possessing accrued precious encounter in cooperating with international clients, PGF Collection
Items Attributes:
(one) Minimal Noise:UnEPT65db.
(2) Reduced Backlash:Backlash is unEPT3 arcmin . Backlash for 2-phase velocity reduction is with in five arcmin.
(three) Higher Performance:1-phase up to ninety five% or far more,two-phase up to ninety two% or more.
(4) Substantial Input Pace:Input pace allows for up to 8000RPM.
(five) High Torque:Large torque output than that of typical planetary EPT EPTs
(six) Upkeep-Cost-free:Minimal grease use,can be life time lubrication
(seven) Higher Speed Reduction Ratio:Speed ratio is above 1/a thousand.
Benefit:
Usage:
- Aerospace,army business.
- Medical well being,digital information sector.
- Market robots,Manufacturing EPT,CNC EPT instrument production sector.
- EPT,Textile,EPT,Foods,EPTlurgical.
- EPT defense engineering,Warehouse EPT business.
Product ILLUMINATE:
Gear BOX Performance Info:
| MODUL NO. | Stage | RATIO sup1 | PGF42 | PGF60 | PGF90 | PGF115 | PGF142 | PGF180 | PGF220 | |
| Rated output torque T2N | Nm | one | 4 | 19 | 48 | one hundred thirty | 270 | 560 | one,100 | one,700 |
| 5 | 22 | sixty | 160 | 330 | 650 | 1,200 | two,000 | |||
| 7 | 19 | 35 | a hundred and forty | 300 | 550 | 1,one hundred | 1,800 | |||
| 8 | seventeen | 35 | one hundred twenty | 260 | five hundred | 1,000 | one,600 | |||
| ten | fourteen | 37 | ninety five | 220 | 370 | 800 | 1,220 | |||
| two | twenty | 19 | 37 | ninety five | 220 | 370 | 800 | 1,220 | ||
| 25 | 22 | sixty | 160 | 330 | 650 | one,200 | two,000 | |||
| 35 | 22 | sixty | a hundred and sixty | 330 | 650 | 1,two hundred | 2,000 | |||
| forty | 22 | 60 | one hundred sixty | 330 | 650 | one,two hundred | 2,000 | |||
| 50 | 22 | 60 | a hundred and sixty | 330 | 650 | 1,200 | two,000 | |||
| 70 | 19 | 35 | one hundred forty | 300 | 50 | one,100 | 1,800 | |||
| 100 | 14 | 37 | 95 | 220 | 370 | 800 | one,220 | |||
| MAX. output torqueT2B | Nm | one,two | 4~100 | three moments of Nominal Output Torque | ||||||
| Rated input pace n1 | rpm | one,two | four~100 | 5,000 | 5,000 | four,000 | 4,000 | 3,000 | 3,000 | 2,000 |
| MAX.enter pace n1B | rpm | one,2 | 4~a hundred | ten,000 | 10,000 | 8,000 | eight,000 | six,000 | six,000 | four,000 |
| Micro Backlash P0 | arcmin | one | four~ten | – | – | le1 | le1 | le1 | le1 | le1 |
| 2 | 20~a hundred | – | – | – | le3 | le3 | le3 | le3 | ||
| EPT Backlash P1 | arcmin | 1 | 4~10 | le3 | le3 | le3 | le3 | le3 | le3 | le3 |
| two | twenty~one hundred | le5 | le5 | le5 | le5 | le5 | le5 | le5 | ||
| StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Backlash P2 | arcmin | 1 | 4~ten | le5 | le5 | le5 | le5 | le5 | le5 | le5 |
| 2 | twenty~one hundred | le7 | le7 | le7 | le7 | le7 | le7 | le7 | ||
| Torsional stiffness | Nm/arcmin | one,two | 4~100 | seven | 13 | 31 | 82 | 151 | 440 | 1006 |
| Max.radial power M2kB2 | Nm | 1,two | 4~a hundred | 43 | a hundred twenty five | 235 | 430 | one,three hundred | 3,064 | five,900 |
| MAX.aXiHu (West Lake) Dis.al power F2B sup2 | N | 1,2 | 4~a hundred | 1,080 | two,a hundred and ten | two,310 | four,800 | 6,two hundred | 5,450 | ten,600 |
| Provider life | hr | one,two | 4~a hundred | 20,000* | ||||||
| Perform efficiency eta | % | 1 | 4~10 | ge97 | ||||||
| 2 | 20~100 | ge94 | ||||||||
| Fat | kg | 1 | 4~ten | .7 | 1.two | 3 | five.6 | 11.nine | 31.six | fifty six.one |
| two | 20~100 | 1 | 1.6 | 3.7 | seven.three | fifteen.nine | 36.9 | 70.4 | ||
| Functioning temperature | ordmC | 1,2 | 4~one hundred | -ten ordmC~ ninety ordmC | ||||||
| Lubrication | 1,two | four~one hundred | Synthetic lubricating oil | |||||||
| Protection degree | 1,two | four~a hundred | IP65 | |||||||
| Set up direction | one,2 | 4~a hundred | Any path | |||||||
| Sound degree(n1=3000rpm) | dB | one,two | 4~one hundred | le56 | le58 | le60 | le63 | le65 | le67 | le70 |
Outline DIMENSION:
Business Check out:
HangEPT EPEPTndeyi EPT amp Electrical Co., Ltd. is a subsidiary of EPTiwan Jun Yi EPTry. Jun Yi EPTry was started in March 1972. The company EPTizes in the design and style, deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment and manufacturing of high-tech various EPTed motors and helical EPT EPTs, worm and worm EPT EPTs and planetary EPTs. Our products sold to much more than thirty international locations close to the planet and win very good reputation and quite a few awards in the overEPT marketplace for several several years. In modern years, to accomplish EPT production and supply outstanding service,we established up subsidiary of creation of planetary EPT EPT in EPT.
Background:
1972:EPTiwan Jun Yi EPTry is founded.
1989:It estabEPTd a overEPT department company ATRUMP EPTRY INC in Los Angeles
1995:Pass the ISO9002 Commodity certification.
2003:Pass the ISO9001 high quality certification and the European CE stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd test which enabled the items to be sold in Europe
2013:The firm established up subsidiary in EPT to attain EPT production.
Factory:
Wisdom Made In ATG,Wisdom The EPT.
Gear:
INSPECTION Gear:
FAQ:
(one) Can I be your agent?
Indeed, welcome to deep cooperation. We have massive promotion of ATG brand name in the marketplace now. For the specifics you should make contact with me.
(two) Is OEM offered?
Sure, OEM is obtainable. We have expert designer to help your brand name advertising.
(three) How can I get a sample to examine your top quality?
Soon after price tag confirmation, you can need for samples to examine our top quality. Cost-free for the samples, but you require to spend for the freight.
(four)What is your quality promise?
We have various types of merchandise which can satisfy diverse good quality stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd.
Our QC department will check merchandise before shipping and delivery. We have a hundred% quality guarantee to clients. We will be dependable for any high quality problem.
(five) How about the shipping time?
The shipping and delivery time is based on the merchandise and the amount. But EPTly, the delivery time for a container is about 1 thirty day period.
Welcome to our firm.
If any problem, really feel totally free to depart message on the bottom of this web page.
in Naples Italy sales price shop near me near me shop factory supplier New Design Aluminium Housing RV Worm Gearbox for Ceramic Industries manufacturer best Cost Custom Cheap wholesaler
In 2000, EPG took the direct in gaining ISO14001 environment management certificate and thereafter passed the inspection of clear generation and recycling economic climate, successful the title of “Zhejiang Eco-friendly Business”. Due to our sincerity in offering best provider to our consumers, understanding of your wants and overriding sense of obligation toward filling purchasing requirements, “We are constantly serving our clients with our greatest goods.” Solution INTRODUCTION:
Major Functions:
1) Created of substantial good quality EPT alloy, ligEPT weigEPT and non-rusting
two) Big output torque and higher radiating performance 3) Clean running and minimal sound, can function EPT time in dreadful issue
4) Very good-searching visual appeal, tough services existence and small quantity
5) Appropriate for omnibearing set up
Primary Materials:
1)housing: aluminium alloy ADC12(dimensions 571-090) die cast iron EPT200(dimensions a hundred and ten-150)
two)Worm:20Cr, ZI Involute profile carbonize ampquencher heat treatment method make EPT floor hardness up to fifty six-62 HRC After precision grinding, carburization layer’s thickness among .3-.5mm.
three)Worm Wheel:wearable stannum alloy CuSn10-one
Merchandise PARAMETERS:
| Dimensions | Specification | EPT ratio | |||||||||||||
| IEC | N | M | P | 7.five | ten | fifteen | twenty | 25 | 30 | forty | fifty | sixty | eighty | 100 | |
| D | |||||||||||||||
| 30 | 63B5 | 95 | 115 | one hundred forty | eleven | eleven | 11 | 11 | eleven | eleven | 11 | 11 | |||
| 63B14 | sixty | 75 | 90 | ||||||||||||
| 56B5 | 80 | 100 | one hundred twenty | 9 | nine | nine | nine | nine | nine | nine | 9 | 9 | nine | ||
| 56B14 | fifty | sixty five | 80 | nine | nine | nine | 9 | nine | nine | 9 | nine | 9 | nine | ||
| 40 | 71B5 | a hundred and ten | a hundred thirty | 160 | fourteen | 14 | fourteen | 14 | 14 | fourteen | fourteen | fourteen | |||
| 71B14 | 70 | eighty five | 105 | ||||||||||||
| 63B5 | ninety five | 115 | 140 | eleven | eleven | eleven | 11 | 11 | 11 | eleven | 11 | eleven | 11 | eleven | |
| 63B14 | sixty | seventy five | 90 | ||||||||||||
| 56B5 | 80 | one hundred | 120 | 9 | 9 | 9 | nine | ||||||||
| 50 | 80B5 | one hundred thirty | 165 | two hundred | 19 | 19 | 19 | 19 | 19 | 19 | 19 | – | – | – | – |
| 80B14 | eighty | 100 | one hundred twenty | ||||||||||||
| 71B5 | a hundred and ten | a hundred thirty | 160 | 14 | fourteen | fourteen | 14 | 14 | fourteen | fourteen | fourteen | fourteen | fourteen | – | |
| 71B14 | 70 | 85 | one zero five | ||||||||||||
| 63B5 | ninety five | 115 | 140 | – | – | – | – | – | – | – | eleven | eleven | 11 | 11 | |
| sixty three | 90B5 | one hundred thirty | one hundred sixty five | two hundred | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | – | – | – |
| 90B14 | 95 | one hundred fifteen | one hundred forty | ||||||||||||
| 80B5 | one hundred thirty | a hundred sixty five | 200 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | – | |
| 80B14 | 80 | 100 | one hundred twenty | ||||||||||||
| 71B5 | a hundred and ten | one hundred thirty | 160 | – | – | – | – | – | – | fourteen | 14 | fourteen | fourteen | fourteen | |
| 71B14 | 70 | 85 | a hundred and five | ||||||||||||
| seventy five | one hundred/112B5 | one hundred eighty | 215 | 250 | 28 | 28 | 28 | – | – | – | – | – | – | – | – |
| a hundred/112B14 | 110 | one hundred thirty | a hundred and sixty | ||||||||||||
| 90B5 | a hundred thirty | 165 | 200 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | ||||
| 90B14 | 95 | one hundred fifteen | 140 | ||||||||||||
| 80B5 | one hundred thirty | one hundred sixty five | 200 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | 19 | ||||
| 80B14 | eighty | one hundred | one hundred twenty | ||||||||||||
| 71B5 | a hundred and ten | 130 | one hundred sixty | 14 | 14 | fourteen | fourteen | ||||||||
| 90 | 100/112B5 | 180 | 215 | 250 | 28 | 28 | 28 | 28 | 28 | 28 | – | – | – | – | – |
| one hundred/112B14 | one hundred ten | a hundred thirty | 160 | ||||||||||||
| 90B5 | 130 | a hundred sixty five | two hundred | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 | – | ||
| 90B14 | 95 | a hundred and fifteen | a hundred and forty | ||||||||||||
| 80B5 | 130 | a hundred sixty five | two hundred | 19 | 19 | 19 | 19 | 19 | |||||||
| 80B14 | 80 | one hundred | a hundred and twenty | ||||||||||||
Item Outline Dimensions:
Business Brief INTRODUCTION:
We are a specialist EPT manufacturer positioned in EPTizhou, EPT province.
Our major goods is complete variety of RV571-one hundred fifty worm EPTs , also equipped hypoid helical EPT, Laptop units, UDL Variators and AC EPTs.
EPT are extensively utilised for purposes these kinds of as: foodstuffs, EPT, EPT, chemical compounds, pharmacy, plastics, paper-creating, building EPTry, metallurgic EPT, environmental defense engineering, and all kinds of automated lines, and assembly strains.
With rapidly shipping, exceptional soon after-sales service, EPT producing faXiHu (West Lake) Dis.Hu (West Lake) Dis.ty, our items offer effectively equally at house and abroad. We have exported our EPTs to SouthEPT Asia, EPTern Europe and the Middle EPT and so on.Our intention is to deveXiHu (West Lake) Dis.Hu (West Lake) Dis. and innovate on the basis of high top quality, and EPT a great reputation for EPTs.
WORKSHOP:
EXHIBITIONS:
FAQ:
one.Q:Can you make as per consumer drawing?
A: Yes, we supply tailored services for clients appropriately. We can use customer’s nameplate for EPTes.
2.Q:What is your conditions of payment ?
A: 30% deposit ahead of generation,stability T/T just before delivery.
three.Q:Are you a trading firm or maker?
A:We are a manufacurer with EPT tools and skilled employees.
four.Q:What’s your creation capacity?
A:8000-9000 PCS/Thirty day period
four.Q:What is your MOQ?
A: one pcs
5.Q:Free of charge sample is available or not?
A:Sure, we can source cost-free sample if client concur to spend for the courier EPT
6.Q:Do you have any certification?
A:Yes, we have CE certification and SGS certification report.
Get in touch with details:
Ms Lingel Pan
For any queries just truly feel cost-free ton contact me. Numerous thanks for your kind consideration to our business!
in Boston United States sales price shop near me near me shop factory supplier 3.3-13W DC Planetary Gear Motor Reducer Gearbox manufacturer best Cost Custom Cheap wholesaler
In 2008, it was awarded with “Nationwide Export Commodity Inspection-cost-free Organization”. There is a complex middle of province degree, EPG academician operating station, experiment station for EPG publish doctors, and national 863 system set up in EPG group. With these platforms and powerful technical ability, the much more than four hundred professionals have designed all selection of unique substantial specific and higher toughness products, conducted mould programs for essential components in the car and nationwide market revitalizing system, ensuing much more than 5000 created more than, amid which 33 items are autonomous patent technologies with four patent authorized . With in depth requirments, we can also build your particular developed item. 3.three-13W DC Planetary Equipment EPT EPT EPT
PG36M555 DC Planetary Equipment EPT for EPT Tv rack
PG36M555 Collection
voltage: 3VDC 6VDC 9VDC 12VDC 24VDC
Speed variety: 3000-9500rpm
EPT: three.three-13w
Common programs: Central air-conditioning valve, Amusement gear, Coin
Refund units, Grill, Oven, Peristaltic pumps, ATM bank
EPT technique, Robot, Healthcare products, Workplace
EPT, EPT EPTs, EPT actuator.
Bodyweight: 320~400g/PCS(approx)
EPT information: CTN dimension: 32X28XH26cm 40PCS/CTN G. W. 16Kgs
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Firm Introduction