Computerized Servo Motor Management CZPT Tensile Screening Device 10KN
one Software
This tests machines is outfitted with personal computer, printer, and general test application, to give an accurate determination of steel the content tensile toughness, yield toughness, the provisions of non-proportional extension energy, elongation, elastic modulus mechanical qualities. Take a look at final results can print (pressure – displacement, drive – deformation, pressure – displacement, pressure – deformation, pressure – time distortion – time) 6 types of curves and connected take a look at data, with the computer software self-check function that can self-diagnose difficulties. It is excellent screening products for the industrial and mining enterprises, scientific research models, universities, engineering quality supervision station. They are excellent testing instrument task good quality tests area, universities and colleges, investigation establishment and industrial and mining.
two. Check functionality of machine and relevant CZPT:
ASTM E8 – 16CZPT Take a look at Techniques for Tension Testing of Metallic Materials
ISO 6892-1 Resources –tensile screening
3. Primary CZPT Parameters:
Product | UTM-10 |
Max. load power | 10KN |
Crosshead Vacation | 1000mm |
Successful tensile place | 700mm |
Powerful Take a look at width | 400mm |
Crossbeam travel pace | .001-1000mm/min |
Tests Specification | UTM-10 |
Max.load | 10KN |
Load accuracy | Class 1 (class .5 optional) |
Load variety | 1%-100%FS (.4%-one hundred%FS optional) |
Load resolution | 1/300000 |
Deformation Measurement Selection | .2%~a hundred%FS |
Deformation accuracy | ≤±1% (≤±0.five% optional) |
Deformation resolution | 1/300000 |
Load management velocity | .01~50 kN/s |
Deformation manage velocity | .002~.5mm/s |
Management Specification | UTM-10 |
Stress fee | .005%~five%FS/s |
Tension price accuracy selection | When rate < 0.05% FS/s, the precision± 2% When fee ≥ .005%FS/s, the precision ±0.five% |
Deformation charge | .005%~5%FS/s |
Deformation price precision selection | When fee < 0.05% FS/s, the precision± 1% When fee ≥ .005%FS/s, the precision ±0.5% |
Displacement manage precision | ±0.5% |
Constant load, deformation and displacement management | .five%~100%FS |
Continuous load, deformation and displacement handle precision | Preset value≥10%FN, inside of the ±0.one% of preset worth Preset benefit<10%FN, within the ±1% of preset value |
Clamping Technical specs | UTM-ten |
Tensile grip | Manual Wedge Fixture |
Round specimen clamping range | Φ4-9mm,(9-fourteen,fourteen-20mm optional) |
Flat specimen clamping selection | -7mm,(seven-fourteen,14-20mm optional) |
Compression Plate | Φ100×100 mm |
Bending fixture | 3 position bending fixture (optional) |
Digital Extensometer for metal substance | YUU10/50 (optional) |
Large deformation extensometer for rubber | DBX-800 (optional) |
four. Primary Unit Attribute:
4.one Rigid flooring-standing frame loading composition with upper place for tensile and decrease 1 for compression and bending examination
four.two Exact ball screws face up to the entire loading with lengthy-existence use and compact structure.
4.3 Velocity management method is set underneath the desk and comprises the synchronous toothed belt and pulley for high-efficient transmission, which are highlighted with low sound and routine maintenance free of charge.
4.4 Fastened crossbeam as upper ones, and sits above the frame and with middle crossbeam as loading beam with sleek travel when tests . The large-accuracy sensor is set up below the crossbeam.
4.five Load automatic withstanding,, stress, pressure manage, cycle handle and self programming.
4.6 Large precision load sensor for guarantee exact and secure measure
four.7 Extensive crossbeam vacation speed from .05 ~ 500mm / min
four.8 Overload defense: as examination drive exceeds 2%-5% of the maximum take a look at force of each file, overload defense, it will end.
5.Parts Supply record
Merchandise | Primary body | Substance | |
1 | Higher beam | 1set | |
two | Cross beam | one set | |
three | Large precision ball screw | two sets | |
5 | Servo motor | ZheJiang TECO Brand (Japan Panasonic Model optional) | |
six | Load sensor | China Brand (The us Transcell Model optional) | |
7 | Reducers | ZheJiang Brand name | |
8 | Synchronous belt | China Brand 1PC | |
nine | Laptop | Lenovo, 1PC with Lcd display screen and all new | |
10 | Printer | HPA4 colour ink-jet printer, 1PC | |
Product | Clamping | QTY | |
one | Guide Wedge Tensile fixture (hydraulic automated clamping fixtures optional) |
1 established | |
two | Spherical Jaws Φ4-nine,(nine-14,fourteen-20mm optional) Flat Jaws: 0-seven,(7-14,fourteen-20mm optional) |
1 established | |
3 | Compression Plate 100x100mm | one set | |
4 | 3 stage bending fixture (optional) | 1 established | |
5 | Digital Extensometer for steel (optional) | 1 established | |
six | Huge deformation extensometer for rubber (optional) | one established |
six. Data Acquisition program
sixty one. The information acquisition system of machine consists of two large precision A/D conversion channel and the maximum resolution ought to be 1/300000 (bare minimum)
six.2. USB driven info -logger with USB 2. and RS- 232 computer interface, five-keys joystick, 2MB RAM, Automated recognition facility, Inner signal generator and twelve-little bit conversion resolution
seven. Computer software
seven.1 Batch and report processing system facility in doc and exl format
seven.two The software is completely compliance with the corresponding global expectations like ISO, ASTM and GB expectations