China Manufacture Integrated Hybrid Servo Stepper System

China Manufacture Integrated Hybrid Servo Stepper System

China manufacture Built-in Hybrid Servo Stepper Technique

57IC09/57IC22/57IC30 Functions
1.Running voltage: DC enter voltage 15VDC to 50VDC,suggest working voltage 36V
two.The max continuous output existing is eight.2A, the max peak current is 13A (superior overload capability of stage servo)
3.Using FOC magnetic positioning manage technological innovation and place vector pulse width modulation (SVPWM) shut-loop handle technologies
four.Employing innovative variable present engineering and frequency conversion engineering, efficiently lowering heat and vibration of motor and driver
5.The quantity of pulses for every cycle (subdivision) can be established by the debug software program or the dial swap placing,the max subdivision no.is 51200.
6.The max pulse frequency of handle instruction is 500KHz (manufacturing facility default is 200KHz)
7.Pulse, route and enable signal enter interface stage is four.5 to 28V appropriate
8.Efficiency: smooth velocity, little overshoot ,good output energy in medium and higher pace, little tracking mistake, reduced heat of motor and driver

Edge
This integrated motor system is hybrid stepper servo motor with driver built-in.It combined the benefit of stepper motor and servo motor.It has easy velocity, modest overshoot ,very good output power in medium and high speed, small monitoring mistake, lower warmth of motor and generate,and also CZPT action misplaced.This integrated design and style has considerably less wiring to reduce glitches,hold stable and effortless for set up.Also it is quite little and light-weight,quite suited for some location that has need of quantity.This new layout will save at minimum 30% of overall expenditure.

Driver Product And Selection Xihu (West Lake) Dis.

Motor Type  57IC09 57IC22 57IC30 5731C10 5731C15
Holding Torque  1.0N•M two.2N•M 3.0N•M 1.0N•M one.5N•M
Vector Maximum Current 6A 6A eight.0A 5.6A 5.6A
Drive Control Scheme Pure vector FOC control scheme, quick start and stop point(PM) control scheme, power 
angle control scheme
Step Angle / Motor Pole Pairs one.8°/50 pairs pole  one.2°/50 pairs pole
CZPTmmended application Operation smooth in low-velocity, and output strength is good in high-pace, 
low temperature rise, small vibration, excellent anti-interference ability and EMC effect
Operation voltage 15-50Vdc,36Vdc recommend 
Overvoltage Protection Voltage 68Vdc±2
Voltage control method 32 bits DSP Vector closed – loop control technology
Pulse Limit Frequency 200KHz
Safety Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm
Input Signal  Pulse, direction and enable differential / single-ended interface signal, interface level 
4.five-28Vdc compatible, no need external current limiting resistor
Output Signal  Alarm / in-position signal OC output, the output capacity is100mA, need external 
pull-up resistor, the maximum pull up voltage is 24Vdc
Position Error Control Accuracy ±1 Pulse
Subdivision No. Default 1600 / rev, through the DIP switch or debug software setting subdivision
(200-51200)

Dialing Switch Configurations

Pulse/Rev. SW1 SW2 SW3 SW4
Default ON ON ON ON
800 OFF ON ON ON
1600 ON OFF ON ON
3200 OFF OFF ON ON
6400 ON ON OFF ON
12800 OFF ON OFF ON
25600 ON OFF OFF ON
51200 OFF OFF OFF ON
a thousand ON ON ON OFF
2000 OFF ON ON OFF
4000 ON OFF ON OFF
5000 OFF OFF ON OFF
8000 ON ON OFF OFF
10000 OFF ON OFF OFF
20000 ON OFF OFF OFF
40000 OFF OFF OFF OFF

Be aware : All previously mentioned is usually employed, and we can personalize in accordance to your request or pick the suitable product for you, you should notify us adhering to parameters: present, voltage, keeping torque, physique size,the software region.

Application
Suited for all kinds of tiny and medium-sized automation equipments and devices. Such as: laser products, medical gear, 3D printer, little and medium-sized engraving equipment, electronic processing products, automatic crawling products, unique CNC machine device, packaging products and robotic. It is specifically useful for consumers who assume minimal sounds and large velocity purposes.

Packaging and transport
1.Outer packing: CZPT export carton with essential transport marks
two.Inner packing: Water-proof packing with shock absorbing EPE and cardboard surrounded 
3.As for each the clients specifications

Our provider
1.Working time : eight:00 a.m – 10:00 p.m .Any concerns, please inform us freely, we will be reply you asap.
2.Direct time : For samples, two to five days will be Ok. For mass creation, the guide time count on the quantities you need.
3.Warrantity time period : eighteen months and Existence-lengthy upkeep service for the product.
4.We take merchandise personalize.

FAQ
Q1: How to select the ideal stepper or servo motor?
A1: There are serveral essential things: dimension, length, holding torque, voltage, present etc.Following affirm them and informed us, we can select the ideal one for you.

Q2: Any other techniques to finalize the model?
A2: Certain, you can ship us the model you are making use of, we can aid you locate the suitable a single.

Q3:How to assure the High quality of CZPT Areas?
A3: We have the integrated technique for industrial areas high quality handle. We have IQC (incoming quality control), IPQCS (in process good quality control section), FQC (last top quality control) and OQC (out-going quality handle) to control every single approach of industrial areas prodution.

This autumn:What is the Benefit of Your Elements for Market Items? 
A4:one.The advantage of our products is the aggressive rates, quick supply and high top quality. Our
staff are responsible-oriented, pleasant-oriented,and diligent-oriented. Our products are highlighted by strict tolerance, sleek end and lengthy provider time.
2.Ahead of we deliver out the merchandise,we check out them a lot more than three moments.

Get in touch with

 

China Manufacture Integrated Hybrid Servo Stepper System